WDCCONT DC Permanent Magnet Motor Control Variable Speed Non Reversing

Enclosure: NEMA 4/12 with Threaded Conduit Holes

Variable Speed DC Controls Convert an AC voltage source to create an affordable PMDC solution for your unique application needs. Features - Dual Voltage – 120/240 Vac, 50/60 Hz - Adjustable horsepower settings - Barrier terminal strip - Packaged bridge supply (Fullwave) - 1% Speed regulation with armature voltage feedback; ± 1/2% with Tach feedback - Adjustable minimum speed (0 - 30% of max.) - Adjustable maximum speed (66 - 110% of base) - Adjustable IR compensation - Adjustable linear acceleration (0.5 - 8 sec.) - Adjustable current limit to 15 Amps - Line Voltage compensation - 5K Ohm speed potentiometer with leads, knob and dial included - Power On/Off switch - 50:1 speed range - Overload capacity: 150% for one minute - Transient Voltage protection - Voltage following mode or DC tachometer follower by supplying underground analog input signal (0 - 12 Vdc) - DC tachometer feedback (6 V at base speed) - Inhibit circuit – permits start and stop without breaking AC lines - Remote Start/Stop via pot circuit or inhibit circuit - Shunt field supply provided (1 Amp max.; 100 V for 120 Vac; 200 V for 240 VAC input) - AC line fuse - Rated NEMA 4/12 with threaded conduit holes